How to Read a FoxFarm Feeding Schedule Without Burning Your Plants
A FoxFarm feeding schedule is a grid: each column is a week or stage of the grow, each row is a product, and each number is how many teaspoons of that product to mix into one gallon of water. Find your week, read down the column, and mix only the products you own. The safe way to use it is to start below those amounts and work up, which this guide explains step by step.
This guide is for adults 21+ in places where growing at home is legal. Laws differ by state and city and can change, so check your state and local rules before you start.
Start with the right chart
FoxFarm publishes its feeding schedules for free on its official feeding schedules page. There isn't just one chart. The page lists separate schedules for soil and for hydroponics, plus different versions for different product lines, such as the standard Soil Feeding Schedule, a Happy Frog schedule and Cultivation Nation 3-part schedules. Some are offered in metric versions and in several languages.
Before you read a single number, check two things:
- Does the chart match your medium? If your plants are in potting soil, use a soil schedule. Coco coir and hydro setups behave differently (more on that in soil vs coco coir for beginners).
- Does it match your bottles? Use the chart for the product line you actually bought.
Download it fresh from FoxFarm instead of using an old screenshot from a forum. Companies update their charts, and a copy of a copy can be out of date or hard to read. That's also why we don't reprint the dose numbers here: always use the current chart from the source.
How the soil chart is laid out
Here's what you'll find on FoxFarm's standard Soil Feeding Schedule, and what each part means for you.
| Part of the chart | What it means | What to do with it |
|---|---|---|
| Columns across the top | A "Seedlings and Cuttings" column, then Week 1 through Week 12 | Find the column for where your plants are right now. |
| Light hours row | The light schedule for each week, dropping to 12 hours a day for the flowering weeks | Use it to see where the chart expects flowering to begin. |
| Rows down the side | One row per product. The base products (Big Bloom, Grow Big and Tiger Bloom) come first, followed by FoxFarm's other supplements | Only read the rows for products you own. Skip the rest. |
| Numbers in the grid | Teaspoons of that product per gallon of water | Multiply by your number of gallons. A blank means that product isn't used that week. |
| Conversion box | Teaspoons converted to milliliters | Handy if you measure with a syringe marked in mL. |
| EC and PPM rows | Expected strength readings for each week (PPM on a 700 scale) | Optional. Only useful if you own an EC or PPM meter. |
| Flush note | A line for FoxFarm's flushing product, SledgeHammer | Optional product; plain water is the basic way to rinse out excess salts. |
| Notes at the bottom | "Feed up to twice per week," plus schedule adjustments | Read these first. They change how you use the whole chart. |
The notes that matter most
- "Feed up to twice per week per gallon of water." Note the words "up to." That's a maximum, not a goal. Plain-water waterings in between are a simple way to avoid overfeeding.
- Extending the stages. The chart says to repeat Week 4 if you want a longer vegetative stage, and repeat Week 12 if flowering runs long. That tells you Week 4 is the last vegetative week on the chart, and the weeks after it are flowering weeks. So the week numbers follow the stages, not the number of weeks since you planted. If you keep plants in veg longer, you stay on the Week 4 column until you switch to flowering.
How to read one week, step by step
- Find your column. Seedling? Use the seedling column. Two weeks into veg? Week 2. Just flipped to 12 hours of light? That's where the flowering weeks begin.
- Read down to the products you own. Ignore the rows for products you don't have. You don't need every bottle on the chart to grow healthy plants.
- Note each number. That's teaspoons per gallon of water.
- Do the math for your batch. Mixing two gallons? Double each number. Mixing half a gallon? Halve it.
- Then scale down for safety, as explained in the next section.
Print the chart, tape it near your tent, and write the date you started each stage at the top. It's the easiest way to keep track of which week you're on.
Why you should start below the chart
Feeding charts are written for plants that are growing well under good conditions. Your first grow may not be there yet. Your light may be weaker, your plants smaller, or your soil may already contain some fertilizer (check the bag). Any of those can make full-strength feeding too much.
The safe approach is simple:
- Start below the chart's amounts. We suggest starting at about half of what the chart lists for the week, then working up slowly if your plants look hungry and healthy.
- Introduce one product at a time. Start with the base product for the stage. Add another product at a later feeding, not all at once. If something goes wrong, you'll know what caused it.
- Let the plants tell you. Deep green, healthy growth with no burnt tips means you're in a good place. Pale lower leaves may mean they want a bit more. Crispy tips mean back off.
It is much easier to fix underfeeding (add a little more next time) than overfeeding (which means flushing and waiting for new growth).
How to mix a feeding safely
- Measure your water into a clean container.
- Read each bottle's label and follow its directions, including any shaking instructions.
- Add one product at a time, stirring well before adding the next. Don't pour concentrates into each other.
- Measure small doses with a syringe. Kitchen teaspoons vary, and a measuring syringe marked in mL is far more exact. The chart's conversion box helps here.
- Check and adjust pH after mixing, never before, because nutrients change the pH. Our guide to pH-ing your water covers this step.
- Feed, then water with plain water next time. Feeding less often, with plain water in between, is an easy way to avoid overdoing it.
Some links below are affiliate links. If you buy through them we may earn a small commission at no extra cost to you.
Store your bottles closed, labeled, and out of reach of children and pets, and follow any storage directions on the label.
What nutrient burn looks like (and how to fix it)
Nutrient burn is what happens when there's more fertilizer salt in the root zone than the plant can handle. University of Maryland Extension lists these typical signs of too much fertilizer in indoor plants:
- Browning or dieback of leaf tips and edges, the classic first sign
- Slower growth, dropping leaves or wilting
- Sometimes yellowing or stunting
- A white crust of fertilizer salts on the soil surface or the outside of the pot
- Damaged roots with dead tips
What to do: stop feeding and switch to plain water. For larger pots, UMD Extension suggests flushing the mix with clear water and letting it drain out the bottom, repeated several times with at least a pot's volume of water each time. For very small pots, replacing the mix can be easier. Burnt leaf tips won't turn green again, so judge your fix by the new growth.
When you start feeding again, go lower than before. Yellowing has many possible causes beyond feeding, so if your symptoms don't match, read why leaves turn yellow before you change anything.
Common beginner mistakes
- Feeding full strength from day one. Start low and work up.
- Counting chart weeks from the day you planted. The weeks follow the stages on the chart.
- Feeding twice every week because the chart says "up to twice."
- Buying every supplement on the chart for your first grow. Start with the basics.
- Using the hydro chart for soil, or an old copy of the chart.
- Adjusting pH before adding nutrients.
- Eyeballing doses instead of measuring.
Want a simple list of the basics to buy? See our complete shopping list.
Frequently asked questions
How do you read a FoxFarm feeding chart?
Each column is a week or stage of the grow, each row is a product, and each number is teaspoons of that product per gallon of water. Find the column for the week your plants are in, read down to the products you own, and multiply by the gallons you are mixing.
Should I use the full amount on the FoxFarm chart?
Not at first. The chart is best treated as a maximum. We suggest starting at about half the listed amount, adding one product at a time, and increasing slowly only if plants look hungry and show no burnt leaf tips.
How often should I feed with FoxFarm nutrients?
The soil chart says to feed up to twice per week. That is a ceiling, not a goal. Feeding less often, with plain water in between, is a simple way to avoid overdoing it. Watch your plants and adjust.
What does nutrient burn look like?
University of Maryland Extension lists browning of leaf tips and edges as the typical sign of too much fertilizer, along with slower growth, leaf drop, wilting and a white salt crust on the soil. Stop feeding and flush with plain water.
Do I need every FoxFarm product on the chart?
No. The chart lists many supplements alongside the base products. Only read the rows for the products you own and skip the rest. A beginner can start with the basics and add products later if there is a clear reason.
Do I pH before or after adding FoxFarm nutrients?
After. Mix the nutrients into the water and stir first, because they change the pH. Then measure and adjust pH in small amounts.
Keep reading
Sources
This article is for general information and education only. It is not legal advice. Growing laws vary by state and city and change often; confirm the rules where you live. For adults 21+ only.
BeginnersGrowGuide.com is a participant in the Amazon Services LLC Associates Program and may earn from qualifying purchases and other affiliate links, at no extra cost to you.